Adams Rite MS1861-02-603 Bottom Rail Two Point Deadlock

• Cylinder Backset:
• Minimum backset is approximately 2-1/4" for the MS1861-01 with vertical bolt only. The MS1861-02 with vertical and horizontal bolts requires placement of cylinder centerline 5-3/4" from nose of door. Both have cylinder center 1-7/8" above bottom edge of door.
• Case:
• Steel with corrosion-resistant plate, measures 1" x 6" x 1-13/16".
• Bolts:
• 3/8" diameter. Stainless steel vertical threshold bolt has 13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw.
• Strike:
• In metal installation, 7/16" drilled holes in threshold are required. For MS1861-02, drilled holes are also required in jamb or opposite door. For wood, metal plate with 7/16" hole must be provided for each bolt.
• Cylinder Cam
• MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.
• 4014 Conversion Kit:
• Specify either 31/32" or 1-1/8" cylinder height 4006 strike and cylinder(s) available separately, if required.
• Standard Package:
• To convert MS1861-01 to MS1861-02, 4014 Conversion Kit provides horizontal bolt assembly with guide and attachment fittings.
• The 4014 Conversion Kit consists of:
• Arm and bolt assembly
• Assembly pin
• Bolt guide bracket
• Mounting screws. To assemble, press pin through disc and arm.

Resources

• Cut Sheet